DC 3.2V to AC 220V/110V

Category:

Message

sales03@oudeson.com

+86 18820603385

DESCRIPTION

I. Panel and Interface

XT90 Battery Input Terminal
Switch : Press to ON position to turn on the power, press to OFF position to turn off the power
DC LED Indicator Light: Displays DC power operating status
DC5525 Adapter or solar panel input terminal, used to charge the battery
USB Output 5V2A
Red LED: This indicator light illuminates when the inverter malfunctions
Green LED This indicator light illuminates when the inverter is operating normally
Three-hole universal socket: AC Output socket

II. Operating Instructions

2.1 Battery Discharge Instructions

Before connecting the battery, please use the matching connection cable provided by our company to connect the product. Before powering on, please carefully confirm that the battery meets the product requirements;
Press the power switch to ON position. At this time, the product DC The work indicator light and the inverter work indicator light will light up green, indicating that the output is normal. At this time, you can connect the device to be used. Press to OFF position to turn off the product;
If not used for a long time, please unplug the input connection cable, which can better extend the battery life;

2.2 Current Charging Instructions

When the battery power is low, you can use the adapter or solar panel to charge the battery. The adapter or solar panel supply voltage is selected 5-25VDC parameters;
The charging port input is DC5525 connector, positive inside and negative outside. Please check the voltage and direction before inserting, and press the power switch to ON position;
After fully charged, the device will automatically turn off the charging. At this time, please unplug the charger or solar panel input cable.

III. Parameter Table

Battery Parameters
Rated Input Voltage	3.2VDC
Rated Input Voltage Range	2.5 VDC~ 3.65 VDC
Undervoltage Protection Value	2.3 VDC~ 2.6 VDC
Undervoltage Recovery Value	2.8VDC-3.2VDC
Input Connector	XT90
DC Output Parameters
Rated Output Power	120W
Rated Output Voltage	12VDC
Output Voltage Range	11.4VDC-12.6VDC
Overload Protection	Constant Power Operation
Inverter Output Parameters
Output Wave Output Waveform	Modified Positive Sine Wave
Output Voltage and Frequency	220V ac 50Hz
Output Power	100W
Output Peak Power	2 00W@ 200ms
Charging Input Parameters
Rated Input Voltage	12VDC
Rated Input Current 流	≥ 10A
Rated Input Voltage Range	10 VDC~ 25 VDC
MPPT Function	Yes, this is optional
Other Parameters
Cooling Method	Air Cooling
Operating Noise	≤50dB
Protection Level	IP21
Charging Ambient Temperature	0℃~45℃
Discharging Ambient Temperature	-10℃~45℃
Operating Ambient Humidity	25%-85% RH (No condensation)
Storage Ambient Humidity	25%-85% RH (No condensation)
Dimensions	20890.080.0mm
Accessories
Complete Machine	1
120W Adapter	1( User Optional )
XT60 Wires	1
XT90 Wires	1
Instructions	1

IV Danger Warnings

1 Do not disassemble the internal components of the product.

The product has internal protection mechanisms and circuits to prevent hazards. Improper disassembly will damage the protection function, causing the product to overheat, smoke, or burn.

2. Do not reverse the battery wires

Do not reverse the polarity of the battery ， This will cause a large current to flow, which will damage the fuse.

3 Avoid using near heat sources

Do not use near fire, ovens, or in environments exceeding 80℃ Overheating will cause internal short circuits, causing it to overheat, smoke, deform, or burn.

4 Do not immerse the product to prevent internal circuits from getting wet

Do not use in damp environments, it may overheat, smoke or burn.

5 Do not disassemble while powered on

When the product is operating, because it is connected to an independent battery Always turn off the power before disassembling and unplug the power cord Ensure that all output interfaces are free of voltage.

Keyword:

None

Message

Professional Service Team Answers