DC3.2V TO DC12V

Category:

DC 3.2V to DC 12V/24V/36V/48V

Message

+86 188-2060-3385

Product Description

I. Panel and Interfaces

XT90 : Battery input terminal
Switch : Press to ON Turn on the power at the location, press to OFF Turn off the power at the location.
LED Indicator light: displays the power supply operating status
XT60:12V Voltage Output Terminal
Fan: Turn on the fan when the product is operating.
DC5525 : Adapter or solar panel input, for charging the battery

II. Operating Instructions

2.1 Battery Discharge Instructions

Before connecting the battery, please use our company’s dedicated connection cable to link the product. Prior to powering on, carefully verify that the battery meets the product’s specifications.
Press the power switch to ON Position: At this point, the product’s status indicator light is green, indicating that the output is normal, and the device can now be connected and used. Press to OFF Then, disable the product;
If the device will not be used for an extended period, please disconnect the power cable to help preserve and extend the battery life.

2.2 Current Charging Instructions

When the battery is low, it can be charged using an adapter or a solar panel; select the appropriate voltage for the adapter or solar panel. 5-25VDC the parameters;
The charging port input is DC5525 Connector: positive inside, negative outside. Please verify the voltage and polarity before inserting, and simultaneously switch the power supply to ON Location;
Once the device is fully charged, it will automatically stop charging. At this point, please disconnect the charger or the solar panel input cable.

III. Parameter Table

battery Parameters
Rated Input Voltage	3.2VDC
Rated Input Voltage Range	2.5 VDC~ 3.65 VDC
Undervoltage protection threshold	2.3 VDC~ 2.6 VDC
Undervoltage recovery value	2.8VDC-3.2VDC
Input connector	XT90
DC Output parameters
Rated Output Power	120W
Rated Output Voltage	12VDC
Output voltage range	11.4VDC-12.6VDC
Overload protection	Constant-power operation
Charging Input parameters
Rated Input Voltage	12VDC
Rated input power Flow	greater than or equal to 10A
Rated Input Voltage Range	10 VDC~ 25 VDC
MPPT function	Yes, this item is optional.
Other Parameters
Cooling method	Air cooling
Operating noise	≤50dB
Protection Level	IP21
Charging ambient temperature	0°C~45°C
Discharge ambient temperature	-10℃~45℃
Workplace humidity	25%-85% RH (No condensation)
Storage environment humidity	25%-85% RH (No condensation)
Size	151.490.080.0mm
Accessories
Complete machine	1
120W Adapter	1( Optional for users )
XT60 Wire	1
XT90 Wire	1
Instruction Manual	1

Four , Hazard Warning

1 1. Disassembly or reassembly of internal components is prohibited.

The product is equipped with protective mechanisms and circuits to prevent hazards. Improper disassembly or reassembly can compromise these protective functions, potentially leading to overheating, smoking, or even combustion.

2. Prohibition of allowing Battery cable reverse connection

Do not connect the battery’s positive and negative terminals. Reverse connection ， An extremely high current will flow, which will damage the fuse.

3 , Avoid use near heat sources

Do not place near open flames, ovens, or exceed 80°C When used in such an environment, overheating can cause internal short circuits, leading to heating, smoking, deformation, or even combustion.

4 , Do not soak the product to prevent internal electrical components from Road To be made wet

Do not For use in humid environments, Fever and smoking may occur. or Combustion.

5 1. Prohibit disassembling equipment while it is powered on.

When the product is in operation, Because it is connected to a standalone battery. , Be sure to power off the device before disassembling it. And unplug the power cord. , ensure that all output interfaces are de-energized.

Keywords:

None

Leave a Message

Professional service team response