800W Bidirectional Inverter with Pure Sine Wave

1. Modified sine wave output 2. Comprehensive protection features: overload protection, undervoltage protection, overvoltage protection, short-circuit protection, and overheating protection 3. Soft-start output to minimize inrush current at power-up 4. Fan speed controlled by load: 30%–40% load—30% fan speed; 70% load—70% fan speed; 60%–100% load—100% fan speed 5. High conversion efficiency

Category:

In-car inverter

Message

+86 188-2060-3385

Product Description

DIN800 Bidirectional Inverter Specification

Rated Output Capacity		800VA
AC Input	Input method	Single-phase two-wire (neutral / Hotline)
	Rated voltage	230VAC
	Rated current	2A
	Maximum current	2.5A
	Rated frequency	50 Hertz
	Input Voltage Range	154~264 VAC ±5 VAC
	Input frequency range	50 Hertz plus or minus 6 Hertz
	Input power factor	>0.95
	Mains power derating	192-264Vac	Charging maximum 15 A
		154~192 Vac	Charging maximum 10A
Battery Input/Output	Battery voltage range	21.6-29.2V
	Rated Battery Voltage	25.6V
	Charging current	1~ 15 A (Settable)
	Charging power	400W ( maximum )
	Voltage accuracy	plus or minus 5%
Battery Protection	Battery leakage current	< 5 00 μA
	Battery overvoltage	30.4V Can be set
	Battery undervoltage	23.2V Can be set
AC output	Output method	Single-phase two-wire (neutral / Hotline)
	Output voltage	220/230/240 Vac ±2% (Inverter Output)
	Output frequency	50 Hz ± 1%
	Waveform	Sine wave THD <3% (Linear load) Sine wave THD <5% (Nonlinear Load)
	Output power factor	1
	Overload capacity	10 min at 110%–120% load ， 1 min at 120%–150% load ， 2s@150%~200% Load ， 200 ms @ >200% Load
	Switching Time	less than or equal to 20ms
Battery discharge efficiency		Full-load efficiency 92% @25.6 VDC
Mains charging efficiency		> 86% Rated voltage &20A Charging
No-load power consumption		< 15W No output in battery mode.
Display	Display mode	LED
	Display Content	POWER LED 、 FAULT LED
Protection function	Mains Power Input	Low-voltage protection, high-voltage protection, and over-temperature protection
	Battery Input	Low-voltage protection, high-voltage protection
	Inverter output	Overload protection, short-circuit protection, undervoltage protection, overvoltage protection, and overheating protection.
USB Output	USB A Interface	5V@3.4A, 9V@2A, 12V@1.5A Support BC1.2, Apple, and Samsung protocols Ø Supports Qualcomm QC 2.0 and QC 3.0 Ø Supports Huawei Fast Charging Protocol (FCP) Ø Supports Samsung Fast Charging Protocol (AFC)
	USB C Interface	5V/3A 9V/3A 12V/2.25A Support BC1.2、 Apple Agreement Supports Qualcomm QC2.0、QC3.0 and QC3+ Supports Huawei fast-charging protocol FCP Supports Samsung Fast Charging Protocol AFC (MAX 12V)
	Protection function	Input overvoltage, input undervoltage, output short circuit, and output overcurrent protection Over-temperature protection for the entire unit 、DP/DM/CC Overvoltage protection ESD 4kV , input DC withstand voltage 40V
Cooling method		Air cooling ( 30% Load -40% Rotational Speed, Intermediate Load 70% Rotational speed 60 Load -100% Rotational speed)

Keywords:

TEK-1 Car Socket-Type Inverter

None

Leave a Message

Professional service team response